Windows CTCI configuration question

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Windows CTCI configuration question

Hercules390 - General mailing list
Hi
 

 I upgrading all the software in my new machine
 

 My default gateway on my router is 10.0.0.1
 

 I have made a static entry for my machine of 10.0.0.6 (This my Windows TCP/IP address)
 

 I was looking at the documentation for enabling TCP/IP via Hercules and one of the steps
 

 was to add a "Fake" TCP/IP which would be the Hercules TCP/IP
 

 This would be via route add command
 

 I cut and paste the example on the Hercules TCP/IP documentation page
 

    route add 192.168.200.0 mask 255.255.255.0 10.1.2.1 metric 1
 

 and this took ?
 

 I thought the first three entries I.e. 10.0.0 had to be the same, that's what the subnet mask is about
 

 I did a route print
 

  IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0         10.0.0.1         10.0.0.6    291
         10.0.0.0        255.0.0.0         On-link          10.0.0.6    291
         10.0.0.6  255.255.255.255         On-link          10.0.0.6    291
   10.255.255.255  255.255.255.255         On-link          10.0.0.6    291
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    331
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    331
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    331
    192.168.200.0    255.255.255.0         10.1.2.1         10.0.0.6     36
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    331
        224.0.0.0        240.0.0.0         On-link          10.0.0.6    291
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    331
  255.255.255.255  255.255.255.255         On-link          10.0.0.6    291
===========================================================================
Persistent Routes:
 

 

 192.168.200.0 is there
 

 Can somebody please explain
 

 Thanks  

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Windows CTCI configuration question

Hercules390 - General mailing list
Normally the mask should be 225.255.255.0

Assuming that the address range is say (in your case) 10.0.0.1

Here I use a localhost setting with 192.168.1.n so maintain the above
mask throughout my various systems.

This allows me to go in to the Hercules host o/s, using any platform
including Linux, Windows (rarely), OSX & Android (for tablet) as well as
a m/f.

Works for me and that is with Linux also running a BBS, http, ftp Mysql,
Oracle and other rdbms system.



On 05/03/17 19:54, [hidden email] [hercules-390] wrote:

>
> Hi
>
>
> I upgrading all the software in my new machine
>
>
> My default gateway on my router is 10.0.0.1
>
>
> I have made a static entry for my machine of 10.0.0.6 (This my Windows
> TCP/IP address)
>
>
> I was looking at the documentation for enabling TCP/IP via Hercules
> and one of the steps
>
>
> was to add a "Fake" TCP/IP which would be the Hercules TCP/IP
>
>
> This would be via route add command
>
>
> I cut and paste the example on the Hercules TCP/IP documentation page
>
>
>    route add 192.168.200.0 mask 255.255.255.0 10.1.2.1 metric 1
>
>
> and this took ?
>
>
> I thought the first three entries I.e. 10.0.0 had to be the same,
> that's what the subnet mask is about
>
>
> I did a route print
>
>
>  IPv4 Route Table
> ===========================================================================
> Active Routes:
> Network Destination        Netmask          Gateway Interface  Metric
>           0.0.0.0          0.0.0.0 10.0.0.1         10.0.0.6    291
>          10.0.0.0        255.0.0.0 On-link          10.0.0.6    291
>          10.0.0.6  255.255.255.255 On-link          10.0.0.6    291
>    10.255.255.255  255.255.255.255 On-link          10.0.0.6    291
>         127.0.0.0        255.0.0.0         On-link 127.0.0.1    331
>         127.0.0.1  255.255.255.255         On-link 127.0.0.1    331
>   127.255.255.255  255.255.255.255         On-link 127.0.0.1    331
>     192.168.200.0    255.255.255.0 10.1.2.1         10.0.0.6     36
>         224.0.0.0        240.0.0.0         On-link 127.0.0.1    331
>         224.0.0.0        240.0.0.0 On-link          10.0.0.6    291
>   255.255.255.255  255.255.255.255         On-link 127.0.0.1    331
>   255.255.255.255  255.255.255.255 On-link          10.0.0.6    291
> ===========================================================================
> Persistent Routes:
>
>
>
> 192.168.200.0 is there
>
>
> Can somebody please explain
>
>
> Thanks
>
>

Loading...