Debian installer menu not shown in Hercules Console

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Debian installer menu not shown in Hercules Console

Akin Lz
This post has NOT been accepted by the mailing list yet.
Try to run Debain installer under Hercules in Win7, everything looks fine until  "Configure the Network" is pop-up. Seems it will accept some commands (just press ".") and turns out a configuration error msg from Debian.

Also I am ok to telnet 001F via 3270 port in DOS prompt but no message or accept any command from there. Please advices what is missing in my setup.

 19:15:20 Hercules Version 3.12
19:15:20 (c)Copyright 1999-2015 by Roger Bowler, Jan Jaeger, and others
19:15:20 Built on Nov 26 2015 at 18:08:44
19:15:20 Build information:
19:15:20   Windows (MSVC) build for AMD64
19:15:20   Modes: S/370 ESA/390 z/Arch
19:15:20   Max CPU Engines: 8
19:15:20   Using fthreads instead of pthreads
19:15:20   Dynamic loading support
19:15:20   Using shared libraries
19:15:20   HTTP Server support
19:15:20   No SIGABEND handler
19:15:20   Regular Expressions support
19:15:20   Automatic Operator support
19:15:20   Machine dependent assists: cmpxchg1 cmpxchg4 cmpxchg8
19:15:20 Running on ADMINIB-0RNDR4U Windows_NT-6.1 AMD64 MP=4
19:15:20 HHCHD018I Loadable module directory is hercules
19:15:20 Crypto module loaded (c) Copyright Bernard van der Helm, 2003-2010
19:15:20   Active: Message Security Assist
19:15:20           Message Security Assist Extension 1
19:15:20           Message Security Assist Extension 2
19:15:20           Message Security Assist Extension 3
19:15:20           Message Security Assist Extension 4
19:15:20 HHCCF077I Engine 0 set to type 3 (IL)
19:15:20 HHCPN051I LOADPARM=
19:15:20 HHCHT001I HTTP listener thread started: tid=00002718, pid=6152
19:15:20 HHCHT013I Using HTTPROOT directory "D:\zpdt312\R3.12\html\"
19:15:20 HHCCF065I Hercules: tid=000021D0, pid=6152, pgid=6152, priority=0
19:15:20 HHCHT006I Waiting for HTTP requests on port 8081
19:15:20 HHCTE001I Console connection thread started: tid=00002204, pid=6152
19:15:20 HHCTE003I Waiting for console connection on port 3270
19:15:20 HHCDA020I D:/disk/sles.3520 cyls=10017 heads=15 tracks=150255 trklen=56832
19:15:20 HHCDA020I D:/disk/sles.3521 cyls=3339 heads=15 tracks=50085 trklen=56832
19:15:20 HHCDA020I D:/disk/sles.5520 cyls=10017 heads=15 tracks=150255 trklen=56832
19:15:20 HHCDA020I D:/disk/rh67.1520 cyls=10017 heads=15 tracks=150255 trklen=56832
19:15:20 HHCDA020I D:/disk/rh67.1521 cyls=10017 heads=15 tracks=150255 trklen=56832
19:15:20 HHCDA020I D:/disk/rh67.1522 cyls=3339 heads=15 tracks=50085 trklen=56832
19:15:20 TunTap64.dll version ** UNPAID TRIAL COPY **  3.4.1.4276 initiated
19:15:20 HHCCP002I CPU0000 thread started: tid=00000AD0, pid=6152, priority=15
19:15:20 HHCTT002I Timer thread started: tid=00002B74, pid=6152, priority=0
19:15:20 HHCCP003I CPU0000 architecture mode z/Arch
19:15:20 HHCPN001I Control panel thread started: tid=000021D0, pid=6152
19:15:20 HHCAO001I Hercules Automatic Operator thread started;
19:15:20           tid=0000257C, pri=0, pid=6152
19:15:25 iplc 000c
19:15:26 HHCCP007I CPU0000 architecture mode set to ESA/390
19:15:26 CPU0000: SIGP Set architecture mode (12) CPU0000, PARM 00000002: CC 0
19:15:26 HHCCP007I CPU0000 architecture mode set to z/Arch
19:15:26 CPU0000: SIGP Set architecture mode (12) CPU0000, PARM 0000000000000002: CC 1 STATUS 00000100
19:15:27 [    0.556664] Linux version 4.9.0-3-s390x (debian-kernel@lists.debian.org) (gcc
19:15:27 [    0.901977] Hierarchical RCU implementation.
19:15:27 [    1.250191] cpu: 1 configured CPUs, 0 standby CPUs
19:15:28 [    1.399451] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
19:15:28 [    2.098034] VFS: Disk quotas dquot_6.6.0
19:15:37 HHCCP041I SYSCONS interface active
19:15:37 [   10.792668] Freeing initrd memory: 10152K (0000000000f90000 - 000000000197a00
19:15:40 Starting system log daemon: syslogd,
19:15:40 klogd.
19:15:41 [1;24r[4l(B)0[m[1;24r[H[J[24;1H[m                                              
19:15:44 [1;24r[4l(B)0[m[1;24r[H[J[24;1H[m                                              
19:15:49 Configure the network device
19:15:58 exit
19:15:58 HHCIN098I Shutdown initiated
19:15:58 The system is going down NOW!
19:15:59 Sent SIGKILL to all processes
19:16:00 HHCCP042I SYSCONS interface inactive
19:16:00 HHCCP011I CPU0000: Disabled wait state
19:16:00           PSW=00020001 80000000 0000000000000FFF
19:16:01 HHCIN900I Begin Hercules shutdown
19:16:01 HHCIN901I Releasing configuration

hercules.cfg
#
# Configuration file for the Hercules z/Architecture emulator.
#
# System Parameters
ARCHMODE ESAME
ASN_AND_LX_REUSE ENABLE
AUTO_SCSI_MOUNT NO
#CCKD RA=2,RAQ=4,RAT=2,WR=2,GCINT=10,GCPARM=0,NOSTRESS=0,TRACE=0,FREEPEND=-1
CODEPAGE 437/500
#CODEPAGE 437/037
CNSLPORT 3270
CONKPALV (3,1,10)
CPUMODEL 2818
CPUPRIO 15
CPUSERIAL 000001
CPUVERID FD
DEVPRIO 8
#DEVTMAX 0
#DIAG8CMD ENABLE ECHO
ECPSVM NO
ENGINES IL
HERCPRIO 0
IODELAY 0
#LEGACYSENSEID OFF
#LOGOPT TIMESTAMP
LPARNAME LNXPROD
LPARNUM 01
MAINSIZE 1024
MANUFACTURER IBM
MAXCPU 2
NUMCPU 1
OSTAILOR QUIET
PANRATE SLOW
PANTITLE "LPAR LNXPROD"
PLANT 02
LOADPARM
#SHCMDOPT NODIAG8
SYSEPOCH 1900
#TIMERINT 50
#TODDRAG 1
#TODPRIO -20
#TRACEOPT REGSFIRST
#TZOFFSET +0000
#XPNDSIZE 0
#YROFFSET 0
#SCLPROOT D:\SCLP
#
# Device statements
#
# Card reader to boot Debian installer
#000C 3505 kernel.debian parmfile.debian initrd.debian ebcdic autopad eof
# Channel-To-Channel Adapter network device pair
#1000.2 CTCI 192.168.1.5 192.168.1.6
# Will be mounted as /
#63FC 3390 LX63FC.63FC
# Will be mounted as /boot
#63FD 3390 LX63FD.63FD
# Will be mounted as /home
#63FE 3390 LX63FE.63FE
# Will be a swap disk
#63FF 3390 LX63FF.63FF
# TZOFFSET  -0700               # Timezone
HTTPPORT   8081 NOAUTH
#INCLUDE D:\
#------------------------------------------------------------------------------
#       Devices
#------------------------------------------------------------------------------
DEFSYM  DDIR  "D:\disk\"
DEFSYM  DSCLP  "D:\sclp\"
#
#0000    SYSG
001F    3215
0009    3215-C      /
0700.2    3270
# .-----------------------Device number
# |     .-----------------Device type
# |     |       .---------File name and parameters
# |     |       |
# V     V       V
#---    ----    --------------------
000C    3505    kernel.debian parmfile.debian initrd.debian ebcdic autopad eof
#000D    3525    punch00d.txt ascii
#000E    1403    print00e.txt crlf